|
|
 Special
Features |
| |
6Gb
Sdram |
| Special
Options |
| |
Onboard
Adaptec AIC 7899 |
|
| CPU |
| |
Support Socket FC-PGA for Intel® Pentium® III or Celeron™ Processor
Supports 233MHz~1400Mhz / 512Kb/cache
|
| Chipset |
| |
ServerWorks ServerSet
III HE-SL chipset
Integrated I/O APIC
CIOB20 I/O bridge and CSB5 south bridge
National NS87417 Super I/O ASIC |
| FSB |
| |
Supports 100 & 133MHz FSB only |
| Main
Memory |
| |
Support 6 memory banks using four 168-pin
unbuffered DIMM.
Support a maximum memory size of 6GB.
Support ECC (1-bit Error Code Correct) function.
Support 3.3V SDRAM DIMM.
Pinouts support 6 banks up to 6GB DRAMs (1024Mb DRAM
technology)
|
| Slots |
| |
Three 64-bit
66MHz (5-volt) PCI slots. *
One 64-bit 66MHz (3.3-volt) PCI slot. *
3.3-volt slot supports Adaptec 2000S zero-channel
RAID controller.
Two 32-bit 33MHz (5-volt) PCI slots.
Total of six usable slots
Note: Click the PCI slot on
image above. |
| On-Board
IDE |
|
|
Dual-channel
master mode
Up to four Enhanced IDE devices
Support for ATA-66/33 compliant IDE and ATAPI compliant
devices ** |
| VGA |
| |
ATI RAGE XL
graphics accelerator
4MB frame buffer (SDRAM)
Standard 15-pin analog VGA ports |
| On-Board
Peripherals |
| |
On-Board Peripherals include:
-- 1 Floppy port supports 2 FDD with 360K, 720K, 1.2M,
1.44M and
2.88Mbytes.
-- 2 Serial ports (COM A + COM B)
-- 1 Parallel port supports SPP/EPP/ECP mode
-- 4 USB ports
-- 1 IR connector for HPSIR/ASK
-- Dual LAN controllers (Intel 82559)
10/100Mbps data transfer rate per controller
-- Adaptec AIC-7899W controller
Dual-channel Ultra160 SCSI support
160MBps maximum data throughput per channel
Up to 15 LVD SCSI devices per channel
-- Tyan Server Management Connector
Supports the Intelligent Platform Management Interfaces
(IPMI)
Support for IPMI, SDR, SEC, FRU
One IPMB and two I2C serial interfaces |
| BIOS |
| |
AMI BIOS on
4Mb Flash ROM
Supports APM v1.2 and ACPI v1.0
User settings for hardware monitoring
Auto-configuration of IDE hard drive types
Multiple boot options
DMI 2.0 compliant |
| Dimension |
| |
Extended ATX
footprint
(13" x 12", 330.2mm x 304.8mm)
One 20-pin ATX power connector
Stacked parallel (one), serial (one) and VGA (one) ports
Stacked USB (two) ports
Side-by-side LAN (two with LED) ports
Stacked keyboard and mouse ports |
| Mounting |
| |
15 mounting holes.
|
|
|
